> 제품 리스트 > DC 전자 부하 > 1200V DC 전자 부하 > 1200V 22000W 프로그래밍 가능한 DC 전자 부하
  • 제품 설명
Overview
제품 속성

모형EL1200VDC22000W

상표APM

원산지중국

Input Voltage0~1200V

Input Current0~800A

Input Power0~22000W

Voltage Readback Accuracy0.015%+0.015%F.S.

Current Readback Accuracy0.04%+0.06%F.S.

Power Readback Accuracy0.1%+0.1%F.S.

Height13U

Warranty2 years

InterfaceRS232/RS485/USB(Standard)

공급 능력 및 추가 정보

포장나무 상자

생산력other

수송Ocean,Land,Air

원산지중국

지원에 대한 지원other

인증 ISO9001/CE/ROHS/CSA/UL

HS 코드8543709990

포트DHL

지불 유형T/T

인 코텀EXW

포장 및 배송
판매 단위:
Piece/Pieces
포장 종류:
나무 상자
사진 예:

APM techonog ies programmable DC electr onic load 1200V 22000W current could reach 800A which provide high current capacity. It can succeed in four kinds of basic working mode such as CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes.

APM techonogies also have 200V DC Electronic Load and 600V DC Electronic Load for lower voltage options.Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity to make Dc Electronic Load System with 200V DC Electronic Load System,600V DC Electronic Load System,1200V DC Electronic Load System.


Functions & Advantages:

Flippable Front Panel and Color Touch Screen
This series programmable DC electronic load is equipped with flippable front panel for 4U, 7U, 10U and 13U height models. Together with a large color touch screen provides simple and fast operation for customer. Real-time update of display input data, status and graphical display makes it more intuitive.


Multiple Operating Mode

This series programmable DC electronic load provides four kinds of basic operating mode including CV (constant voltage), CC (constant current), CR (constant resistance), CP (constant power), to satisfy a wide range of test requirements.


Adjustable CV Loop Speed
This series electronic load supports CV loop response speed setting to FAST, NORMAL or SLOW to satisfy different test requirements. This function may avoid the inaccurate measurement or testing fail caused by the response speed mismatch between the load and the power supply, which is possible to improve test efficiency and reduce costs on the equipments, time and expenses.


Dynamic Load

This series electronic load can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.


Sine Wave Dynamic Load
This series electronic load supports sine wave loading function which allows to load sine wave,can be used for impedance analysis test of fuel cells.


Dynamic Frequency Sweep Function

This series electronic load provides a unique constant current dynamic sweep to use frequency conversion to find out the UUT voltage of worst case.
This CC dynamic sweep allows the user to edit two load levels, start frequency, end frequency, step frequency, dwell etc.
The sampling rate is up to 500kHz, which make it can simulate different loading conditions for most test requirements.


Battery Discharge Test
This series electronic load has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end voltage or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.

Auto Mode

This mode allows automatically switches among CV, CR, CC and CP modes. It is suitable for lithium ion battery charger testing to get a complete VI charging curve. This flexible auto mode also enormously improve test efficiency.


OCP/OPP Tests

This series electronic load provides OCP and OPP modes are mainly applied in over-current and over-power points tests. After the testing the load can automatically judge the test result according to the set specifications. Take OPP testing as example, the OPP provides ramped up power for the load to test the UUT voltage whether has reached trigger voltage level and to judge if the protection is acting normally or not.


List Mode

The list function allows user to create waveform files to automatically simulate various complicated loading conditions. The list mode has 10 files, by editing operating mode (including CC, CV, CR,CP, Short and ON/OFF), repeat times, total steps, setting value of each step and step time etc. This function can be applied to the testing of output characteristic and stability for power supply.


Master/Slave Control

This series electronic load provides the user with Master/slave mode, supports parallel connection under different power and same voltage and dynamically synchronized. In Master/slave mode, the user only need to control the master one, the load current will be automatically calculated and downloaded to the slave loads. The Master/slave mode greatly simplifies the operation when increased power is needed.


External Control and Current/Voltage Monitoring

This series electronic load has analog control interface to control the input voltage and current. The external signal 0 to 10V controls the sinking condition from 0 to full scale. Using the external control mode can simulate arbitrary waveform which is ideal for industrial control requirement.
The 0 to 10V analog output signal of V-MON/I-MON terminals represent input to which the terminals belong from 0 to full range.
An external voltmeter or oscilloscope can be connected to display input voltage/current change.


제품 디렉토리 : DC 전자 부하 > 1200V DC 전자 부하

회사 개요
APM Technologies ( Dongguan ) Co., Ltd. 제조 장비. 우리 회사는 제품 계획, 연구 개발, 실험실 실험, 테스트 및 품질 관리에 대한 완전한 시스템을 보유하고 있습니다. 또한 ISO 9001 표준 인증을 통과했습니다. APM Technologies의 R & D 팀은 박사 학위를 포괄하는 100 명 이상의 직원으로 구성됩니다. 및 관련 산업의 선임 전문가뿐만 아니라 마스터 학위 소지자. 많은 국내 및 국제 연구팀과 협력하고 주요 대학과의 장기적인 전략적 협력을 유지함으로써 우리 회사는 제품과 서비스가 업계를 이끌고 있는지 확인할 수 있습니다. 우리의 전문 기술과 기술을 지속적으로 혁신하고 돌파하기 위해 전문 기술과 기술을 적용함으로써 지금까지 APM Technologies는 다수의 발명 특허를 신청했으며 이미 여러 가지 유틸리티 특허, 디자인 특허, 소프트웨어 저작권 및 기타 관련 특허를 얻었습니다. 당사의 제품은 CE, VDE, SAA, CQC, CSA, FCC 등을 통과했습니다. 인증. APM 기술은 처음부터 현재까지, 그리고 과거부터 미래까지 항상 "끊임없는 우수 추구"라는 회사의 정신을지지하여 고객에게 "하루 24 시간 지속적인 서비스"를 제공합니다.
회사 사진
생산 인증
다운로드
> 제품 리스트 > DC 전자 부하 > 1200V DC 전자 부하 > 1200V 22000W 프로그래밍 가능한 DC 전자 부하
이 업체에게 이메일로 보내기
  • *제목:
  • *에:
    Ms. Emily Cui
  • *이메일:
  • *메시지:
    귀하의 메시지 20-8000 자 사이 여야합니다
질문 보내기
*
*

홈페이지

Product

Phone

우리에 대해

문의

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신